C-860C
Function features:
*Semi-automatic tire changer with tilt arm
*pneuma-lock
*The mounting head is made of specail steel which is wearable,
unpliable and unbreakable.
*The hexangular shaft is made of S41 hex steel, which can avoid the
distortion when operate the stiff tire.
*Double-bending technic made the vertical column with high
intensity.
*The clamp is made of specail material, be able to bear long time.
*The clamp on the turntable has 3 steps to adjust inside to ensure
clamping 10"-26" tire.
*The quick deflate valves are installed in front of / at the rear
of the bead breaker cylinder to fasten the speed of the movement of
the piston. The one-side of movement can be compeleted in about 2-3
seconds.
*The horizontal arm use 50mm squre shaft which can ensure the
intensity and endurance.
*The bead breaker blade adopts the arc design and can rotate in
four direction so that it can release the bead brake power better
when do the work.
*The width of the bead breaker arm working can adjust two step to
make sure brake max 15" tire.
*The pedal assembly adopts the drawer structure in order to remove
and maintain expediently.
*The diameter of the clamp control cylinder is 80mm to make sure
the clamp power stronger.
*There's right helper as the standard configuration to demount the
flat and hard tire expediently.
*Standard configuration Italy air regulator.
*Provide exhaust inflation function to help the tire stick against
the rim closely very fast.
| Model | C860C |
| Rim Clamping from Outside | 10”～24” |
| Rim Clamping from lnside | 13”～26” |
| Maximum Wheel Diameter | 1040mm |
| Wheel Width | 3”～15” |
| Operating Pressure | 8～10bar |
| Motor Power | 0.75/1.1kw |
| Noise Level | ﹤75db |
| Net Weight | 350KG |
| Gross Weight | 400KG |
| Packing Dimension(Machine) | 1100X860X1020mm |
| Packing Dimension(Helper) | 1280X550X450mm |
| Volume | 1.28CBM |
| Quantity in 20”Container | 20 |
| Quantity in 40”Container | 46 |
